Industry News

Industry News - KGL Machinery&Electronics Co., Ltd. 
  • According to the tool data of the programming operation guide, replace the tool to be processed, and let the tool touch the height measuring instrument placed on the reference surface. When the measuring instrument is lit red, set the relative coordinate value of this point to zero.

    2020-06-24

  • Spindle speed setting during processing: N=1000×V/ (3.14×D) N: Spindle speed (rpm/min) V: cutting speed (m/min) D: tool diameter (mm) Processing feed rate setting: F=N×M×Fn F: Feeding speed (mm/min) M: number of cutting edges Fn: cutting amount of tool (mm/rev)

    2020-06-24

  • Direct CNC (DNC) operation: Before DNC CNC machining, the workpiece must be clamped, the zero position set, and the parameters set. Open the processing program to be transferred in the computer to check, and then let the computer enter the DNC state, and enter the file name of the correct processing program.

    2020-06-24

  • Among them, the meaning of tool radius compensation of CNC machining is as follows.

    2020-06-18

  • The passage is about CNC Machining.

    2020-06-18

  • For the clamped work piece, the touch head can be used to set the reference number of the touch number. The touch head can be used in both photoelectric and mechanical types.

    2020-06-11