Industry News

CNC tool preparation for all tools

2020-06-24
According to the tool data of the programming operation guide, replace the tool to be processed, and let the tool touch the height measuring instrument placed on the reference surface. When the measuring instrument is lit red, set the relative coordinate value of this point to zero.

Move the tool to a safe place, manually move the tool down 50mm, and set the relative coordinate value at this point to zero, which is the zero position of the Z axis.

Record the mechanical coordinate Z value of this point in one of G54~G59. This completes the zero setting of the workpiece X, Y, and Z axes. Once again, carefully check the correctness of the data.

The one-sided touch is also the side of the workpiece X, Y axis according to the above method, offset the relative coordinate value of the X, Y axis at this point. The radius of the touch head is the zero position of the X, Y axis, and finally put a point The mechanical seats of X and Y axes are marked in one of G54~G59. Once again, carefully check the correctness of the data.

Check the correctness of the zero point, move the X and Y axes to the side suspension of the workpiece, and visually check the correctness of the zero point according to the size of the workpiece.

Copy the program file to the computer according to the file path of the programming operation guide.