Industry News

CNC Machine Tool Maintenance

2020-06-11



CNC machine tool maintenance

1. Clean and maintain the CNC machine tool half an hour before going to work every day. If an air gun or oil gun is used to clean up the chips, there must be a knife on the spindle of the CNC machine tool. It is forbidden to blow the cone hole of the spindle of the CNC machine tool with an air gun or an oil gun, to avoid blowing fine particles and other debris into the spindle hole and affect the cleanliness of the spindle of the CNC machine tool.

2. Check whether the lubricating machine of the CNC machine tool is working normally and whether the lubricating oil is sufficient, and start up in the normal order.

3. Start the spindle (rotation speed is 501R/M) to start the spindle preheating before the CNC machine tool officially works.